General - WHEN DO I ADJUST THE TRIM? / HOW TO ADJUST THE TRIM?
NOTE: ALWAYS ATTEMPT TO CALIBRATE PRIOR TO ADJUSTING THE TRIM. ALSO CHECK ALL PROPELLERS FOR DAMAGE, WHICH CAN CAUSE DRIFTING.
After attempting to calibrate your drone, if you are still experiencing issues, you can adjust the trim. You should adjust the trim when you see abnormal drifting, abnormal drifting can be classified if the drone drifts more than 3 feet in 3 seconds.
- Place drone on the ground. Bring the throttle stick (left stick) to lowest position, press A to start trim mode.
- Quickly push the right stick in the opposite direction from the drift direction and let it set back to the center.
- Push A again to exit trim mode.
- Do a test flight. If the drone still drifts, repeat steps 1 to 3. NOTE: Adjust trim when the drone is landed not while flying. To reset the trim, perform steps of calibration explained above